000 0369

truck pan modified, differential clearance, here you can see the difference in the distance on the driver side, cmpared to the tt pan, these are the same motor mounts in all pics

000 0310

000 0309

this is the 6.0 truck pan I modified, only holds 4.5qts. but it fits with 4l80e!!

here you can see the taper on the driver side of the pan

I cut the pan to be the same width, on the bottom, as stock pan I cut it a litle extra to have room to let the rear of the engine drop down, for trans removal. so it is not necessary to drop the front diff', or pull the engine to remove the trans'

side by side comparison of cut truck pan and cut tt pan. you can see how much I had to cut the tt pan. I used 1/8th x 2" piece of aluminum to fill the hole

000 0203

000 0233

000 0236

000 0235 modified oil pan

000 0249

000 0250

000 0362