[1024x768]
Passenger side engine mount. The stock LS1 mount was cut down and sitting on some laser cut plates. Then will be welded to the laser plates that will allow it to be bolted to the stock frame location. (Disregard U-bolt used to hold everything together, its an ODD SIZED bolt and thats all I had).
Viewed: 214 times.
|
[1024x768]
Straight view of Driver's side engine mount completed. The upper F-body mount is tacked in place here. Will be TIG-welded before final installation.
Viewed: 191 times.
|
[1024x768]
Prototype mounts tacked together for final mocking.
Viewed: 179 times.
|
[1024x768]
Prototype mounts tacked together for final mocking.
Viewed: 173 times.
|
[1024x768]
Prototype mounts tacked together for final mocking.
Viewed: 172 times.
|
[1024x768]
Driver's side F-body mount cut down and tacked to the laser cut plate. Ready for the final TIG Welding.
Viewed: 192 times.
|
[1024x768]
Passenger Side motor mount installed and tacked. Going to have them TIG WELDED for superior strength and then either paint or coat them.
Viewed: 214 times.
|
[1024x768]
Stock F-body mounts. I dont have the GM part number. I bought a pair off ebay for $15 + shipping.
Viewed: 182 times.
|
[1024x768]
Prototype mounts tacked together for final mocking.
Viewed: 280 times.
|
