Throttle Cable with conversion ends to allow connection to the LS1 throttle body and to the gas pedal.
GM Part #12565559 $15.70

2nd Option for the Throttle cable. This is from LOKAR its the TC-1000LS1 and it was $39.95 from Summit Racing.

These are the upper radiator supports used when moving the radiator forward under the radiator support. These are from Jags-That-Run for $33 + Shipping. They are exceptional quality but do NOT come with the cushions.

Initially I had planned on using the SYTY ECM to control the LS6 powerplant. I bought these ECM connectors at www.roseandwrenches.biz At less than $10 each they are a MUST.

I ordered these Blue Carbon Fiber Covers from www.tkoperformance.com for the project. I wanted something that was smooth and didnt have Corvette written on them. I am not a huge fan of CF, but these covers are AWESOME.

1997 C5 Corvette Fuel Rail had a return type system. Since the GMC Typhoon does also, I elected to utilize this fuel rail. GM #1255-6705

Notice the difference in the head ports vs the flanges. (Header flange part# 12480130) There are also gaskets (# 12558573) and bolts (#12551187 12x needed) that are NOT pictured.

These are upper and lower radiator cushions for supporting the radiator. They come in a 5 pack from GM and are about $14/shipped GM Part # 1233 8053

Purchase $400+ parts from GMPartsdirect.com and they throw in this wonderful dorky hat. Whoooop-de-dooooo.

The corvette alternator/PS pump bracket. This item moves the Alt/PS Pump to stock Vette location which is beneficial for frame clearance in this application.
GM Part #12578068

Mandatory MUST HAVE for LS1/6 swap. Has ECM Pin outs, etc. All sortsa goodies inside. Thanks Nick for the info.
GM PART #88959384

Corvette balancer. The F-body,fullsize truck and Corvette accessories are all different in their OFFSET from the block. With trucks sticking out significantly farther than the vette accessories.

Corvette balancer GM Part #12560115

This flywheel allows conversion from the Gen 3 crankshaft to a 700r4. It also has correct hole spacing for a 700r4 application with 298mm torque converter bolt spacing (LS1's require 300mm spacing).
GM Part# 12551367 87.24$

Head ports vs header flange. (Header flange part# 12480130) There are also gaskets (# 12558573) and bolts (#12551187 12x needed) that are NOT pictured.

Header Flanges Direct from GM ! (Header flange part# 12480130) There are also gaskets (# 12558573) and bolts (#12551187 12x needed) that are NOT pictured.